Model
Adventurer Hauler (Gas)
Measurements
Length
115 in. (2,922 mm) overall
43.5 in. (1,105 mm) cargo bed
Height
71.9 in. (1,826 mm) overall with suntop
11.8 in. (300 mm) floor board
9 in. (228 mm) cargo bed
Width
48.9 in. (1,243 mm) overall
43.7 in. (1,109 mm) cargo bed
Weight
847 lbs. (384 kg) with standard cargo box and flat bed with stake side
Wheelbase
75.5 in. (1,917 mm)
Ground Clearance
4.5 in. (114 mm) minimum
Turning Radius
10.8 ft. (3.3 m)
Engine
Engine
Yamaha built, low-emission, 1-cylinder, 60° incline, OHV, forced-air cooled
Horsepower
11.4 hp (8.5 kW) @ 3,500 rpm
Carburetion
Electronic fuel injection
Ignition
Transistor magneto
Air Filter
2-stage, urethane-foam pre-cleaner and high-capacity pleated paper cartridge
Fuel Tank Capacity
5.8 gal. (22 l)
Lubrication
Splash-style positive oil
Drivetrain
Transmission
EnduraDrive™ V-belt automatic forward / reverse transaxle equipped with high-precision helical gears
Drive Axle Ratio: 11.40:1
Operational
Steering
Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed bearings and greaseless tie-rod ends
Brakes
Self-adjusting, mechanical drum on all 4 wheels
Suspension
Front: Tru-Trak II™ fully independent automotive-style strut
Rear: Unit swingarm with coil springs over hydraulic shock absorbers
Tires
18.5 x 8.5-8 (6-ply rating)
Seating
Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and mated to a warp and moisture resistant polypropylene bottom, strengthened with plated steel inserts (980 mm)
Capacity: 2 persons
Speed
Max Forward: 15.5 mph (25 km/h)
Max Reverse: 10 mph (16 km/h)
Frame
HybriCore™ chassis features a robotic welded automotive ladder-style steel frame mated to a polypropylene structural floor; frame is protected with a multi-step full-immersion phosphate treatment, electro-deposition epoxy-based coating, and an electrostatic applied polyester / urethane powder topcoat
Load Capacity
Cargo Bed: 800 lbs. (363 kg)
Other