PACE EDWARDS Retractable Tonneau Covers

As Low As: $1949.99

Many Other Brands and Models Available!

IF YOU DON’T SEE IT – JUST ASK!

Brand: Pace Edwards

Description

PACE EDWARDS – HARD ROLLING TONNEAUS | TRUCK BED COVERS

PACE EDWARDS SERIES / MODELS

PACE EDWARDS – JACKRABBIT

Pace Edwards JackRabbit retractable hard tonneau covers retract automatically with the turn of a knob, and close easily using a pull strap. The covers open and close without needing the key, have locking positions every 12 in., and automatically catch into each position as you pull them forward. They also have a low-profile, aerodynamic design that is 100 percent flush-mounted with textured finish rails and top cover. Featuring a clamp-in design and for easy accessibility, the handle and lock are mounted to the driver side for convenient, easy use.
    • Canister Must Be Used With Rails To Make One Unit
    • No-Drill
    • Clamp-In Design (In Most Applications)
    • Latches Or Locks In Place Every 12 in. Along Rail
    • Whole System Usually Installs In An Hour Or Less
    • 3-Year Warranty
    • Longest Of Any Retractable Cover
    • Opens With Turn Of Knob
    • Closes Using Pullstrap
    • Rigid ArmorTec Vinyl Polymer Deck Material
    • Lo-Profile Top Cover
    • Contoured Canister Design
Pace Edwards JRI0601 Jackrabbit

PACE EDWARDS – JACKRABBIT FULLMETAL

All of the features and benefits of the original JackRabbit truck bed covers come together with the added quality of an all-metal cover to create the Full Metal JackRabbits. All operation and installation of these covers is the same, but with the Full Metal JackRabbit tonneau covers, you get the added strength and good looks of all-metal, interlocked, powdercoated aluminum panels. The Full Metal JackRabbits’ weather-sealed, low-profile, Latch-n-Lok handle system allows the covers to be latched every 12 in. With the Pace Edwards Continuous Tension Spring, smooth operation is ensured every time you open or close these truck bed covers. Their flush-mounted, top-cover design also provides a sleek, low-profile look that enhances the appearance of your truck.
    • Opens With Turn Of Knob
    • Clamp-In Design (In Most Applications)
    • Latches Or Locks In Place Every 12 in. Along Rail
    • Whole System Usually Installs In An Hour Or Less
    • Continuous Tension Spring Allows Smooth Operation
    • 3-Year Warranty
    • Longest Of Any Retractable Cover
    • Closes Using Pullstrap
    • Powder-Coated Black Aluminum Panel Deck/Rails
    • Lo-Profile Top Cover
    • Contoured Canister Design
    • No-Drill
Pace Edwards FMI0101 Jackrabbit Fullmetal

PACE EDWARDS – BEDLOCKER BED COVER

These BedLocker combos are Pace Edwards’ innovative electric retractable tonneau covers. They feature a flush-mounted design and a textured black finish for tremendous strength, security, durability, and style. Operated via remote control, they open and close at the touch of a button in less than 30 seconds, and can be stopped at any point. With their drop-in, clamp-in design, these systems require no drilling on most applications, and install in less than one hour. Packed with value-added features, the BedLocker’s patented silicone rubber hinge seal will not allow water to penetrate the retractable blanket. The covers are equipped with a motor drive for ultimate performance and reliability.
    • Electric Retractable Tonneau Cover Opens w/Remote
    • DriveSystem Release Lever In Case Of Power Failure
    • Whole System Usually Installs In An Hour Or Less
    • Powder-Coated Black Aluminum Panel Deck And Rails
    • Lo-Profile Top Cover
    • Contoured Canister Design
    • No-Drill
    • Clamp-In Design (In Most Applications)
    • Electromagnetic Brake Locks Cover In Any Position
    • Hidden Potted Electronics Will Not Fail In Element
Pace Edwards BLI0601 Bedlocker Bed Cover

PACE EDWARDS – SWITCHBLADE BED COVER

Turning your truck bed into a secure storage area while maintaining full use of your truck bed is a breeze with the Pace Edwards Switchblade tonneau cover. The Switchblade can be mounted in minutes and can be removed just as easily to allow full bed access. The Pace Edwards Switchblade is designed with a Continuous Tension Spring that allows the cover to roll in or out of the canister smoothly. This spring action is also what allows you to operate this cover from either side with one hand. The tonneau cover is made of aluminum panels bonded with Pace’s patented ArmorTek. ArmorTek is a padded weather resistant polymer. This layer is bonded right to the aluminum panels and gives the truck bed cover a soft Top look and feel without compromising on security. A full width handle and pull strap are also included for your convenience. Installation of the Switchblade is like no other cover in its class. The only tools you need are a 7/16 wrench and a Phillips head screwdriver. Pace Edwards designed this cover to install with clamps and no need for any drilling. The best part about the Switchblade is that it can be uninstalled and bundled up with an included storage strap for storage when you need your full truck bed.
    • Removable Canister For Total Truck Bed Access
    • Convenient Pull Strap
    • No Need to Climb Into Truck To Operate
    • No Drill Clamp In Design For Quick Installation
    • Easy To Install Or Remove
    • Anytime
    • Anywhere
    • Allows Full Rear Visibility
    • 1 Year Limited Warranty
    • Continuous Tension Spring™ Helps Cover Retract Smoothly
    • Cover Is Weather Resistant
    • Padded Polymer Bonded To Alum. Panels
    • Full Width Handle Makes Opening And Closing From Either Side
Pace Edwards SWD2233 Switchblade

PACE EDWARDS – SWITCHBLADE METAL BED COVER

Turning your truck bed into a secure storage area while maintaining full use of your truck bed is a breeze with the Pace Edwards Switchblade tonneau cover. The Switchblade can be mounted in minutes and can be removed just as easily to allow full bed access. The Pace Edwards Switchblade is designed with a Continuous Tension Spring that allows the cover to roll in or out of the canister smoothly. This spring action is also what allows you to operate this cover from either side with one hand. The tonneau cover is made of aluminum panels bonded with Pace’s patented ArmorTek. ArmorTek is a padded weather resistant polymer. This layer is bonded right to the aluminum panels and gives the truck bed cover a soft Top look and feel without compromising on security. A full width handle and pull strap are also included for your convenience. Installation of the Switchblade is like no other cover in its class. The only tools you need are a 7/16 wrench and a Phillips head screwdriver. Pace Edwards designed this cover to install with clamps and no need for any drilling. The best part about the Switchblade is that it can be uninstalled and bundled up with an included storage strap for storage when you need your full truck bed.
    • Removable Canister For Total Truck Bed Access
    • Anytime
    • Anywhere
    • Allows Full Rear Visibility
    • 1 Year Limited Warranty
    • Continuous Tension Spring™ Helps Cover Retract Smoothly
    • Full Width Handle Makes Opening And Closing From Either Side
    • Convenient Pull Strap
    • No Need to Climb Into Truck To Operate
    • No Drill Clamp In Design For Quick Installation
    • Easy To Install Or Remove
Pace Edwards SMD2336 Switchblade Metal

PACE EDWARDS – ULTRAGROOVE BED COVER

With a built-in RES(TM) rail expansion system, UltraGroove(TM) makes it easy to attach nearly any Thule(R) or Yakima(R) rack for bikes, kayaks, cargo baskets and more. With or without racks, it’s incredibly easy to use and it’s covered with a weather-resistant, padded ArmorTek deck laminated to rigid aluminum panels. It opens quickly with just a turn of the lock knob and closes just as easily with a pull on the built-in strap.
    • Built-In RES™ Rail Expansion SystemTurn Knob For Easy AccessPadded Armortek® Deck Laminated To Rigid Aluminum PanelsRear End Cap3 Year Limited Warranty
Pace Edwards KRC0303 Ultragroove

PACE EDWARDS – ULTRAGROOVE METAL BED COVER

UltraGroove Metal(TM) is a retractable tonneau that makes it easy to attach nearly any Thule(R) or Yakima(R) rack to carry bikes, kayaks, cargo baskets and more. It offers truck owners the metal look with heavy-gauge aluminum panels and a tough, powder-coated, matte-black surface. With or without racks, UltraGroove Metal is a great-looking retractable tonneau that’s incredibly easy to use. It opens quickly with just a turn of the lock knob and closes just as easily with a pull on the built-in strap. The built-in RES(TM) rail expansion system can quickly be outfitted with racks to carry your recreational gear.
    • Built-In RES™ Rail Expansion System
    • Turn Knob For Easy Access
    • Tough Powder Coated Matte Surface
    • Rear End Cap
    • 3 Year Limited Warranty
Pace Edwards KMC0404 Ultragroove Metal

Applications

Product Fitment*
Year Make Model
Chevrolet Colorado
Chevrolet Silverado
Chevrolet 1500
Chevrolet 2500
Chevrolet 3500
Dodge Ram
Ford F-150
Ford F-250
Ford F-350
Ford Ranger
Ford Super Duty
GMC Canyon
GMC Seirra
Jeep Gladiator
Nissan Frontier
Nissan Titan
Ram 1500
Ram 2500
Ram 3500
Toyota Tacoma
Toyota Tundra
* Product Fitmant Subject to change without notice. Consult Manufacturer for latest info.

Our Partners

Translate »